Español | Chile | Perú | Uruguay | Panama | Morocco | Portugal | Italy | Romania | Poland | USA

Home > Formwork systems > Alisply walls solutions: Alisply circular walls

Alisply circular walls

Recoverable modular formwork system for circular fair-faced concrete walls, designed to be handled with a crane. Alisply Circular consists of a light galvanized steel frame and a 15 mm thick phenolic plywood lining. The frame incorporates tie rods that allow giving the wall the required radius on site.
CHARACTERISTICS
Interior panels measurements:
- Width: 240 cm and heights: 240, 120 and 60 cm
Interior extensions measurements:
- Widths: 4 and 2 cm and heights: 240, 120 and 60 cm
Allowable pressure: 6000 Kg. /m2 (60 KN/m2)
18 mm thick phenolic plywood form surface

Exterior panels measurements:
- Width: 250 cm and heights: 240, 120 and 60 cm
Exterior extensions measurements:
- Widths: 4 and 2 cm and heights: 240, 120 and 60 cm
Allowable pressure: 6000 Kg. /m2 (60 KN/m2)
18 mm thick phenolic plywood form surface

ADVANTAGES OF THE SYSTEM
- Extra-flat and pre-assembled module (only 15 cm thick).
- Horizontal and vertical joints between walls by means of the quick and manual clamp.
- Wall radius easy to change by means of the system incorporated in the panel.
- Radius tie rods protected against knocks and concrete.
- Accessories: Working Platform, Climbing Platform and 3 to 9 m One-faced Wall.
- Fair-faced concrete finish with imperceptible joints.
- Minimum radius: 2,5 m
Alsina_edificacion_14
Pictures
Alsina_edificacion_14 Alsina_edificacion_42 Alsina_edificacion_68
Downloads
CADS
Catalog
© Encofrados Alsina 2009.Contact with Webmaster
Branches | Credits